Is this true? In a drawing, holes dimension only can be specified after bending of sheet metals.? - what are the dimensions of a of a dvd
The importance of planning for the model. I need a link indicate any such rule.
What Are The Dimensions Of A Of A Dvd Is This True? In A Drawing, Holes Dimension Only Can Be Specified After Bending Of Sheet Metals.?
2 comments:
I have a lot of sheet and plate bending his 20-year-old.
If you have a piece, it may be easier to plug the holes after the turn.
In other words, if one to evaluate the tools of violence after the fold.
Several times a coupon or a piece of the sample with holes or
Holes on the flat part before folding.
After folding, hole placement will be reviewed and if not correct, the measures
how far the hole is out of place and adjustments are made for
The apartment has been slightly shifted with holes and another piece of the exhibition is over.
If the voucher specimen is accurate and has holes where you want
You can go ahead and the production of drilling or punching
the material.
Each machine is in the placement of the operator of the raw materials and other
Processes that are likely to do first, working the speed of the machine
Configuration of the machine from one place to another, etc.
For all I know is not a statin fixed point of referenceG in the rule.
Wingman
There is no rule about when, or how the holes should be based on the size of the hole, the plate thickness, tolerances, etc. If the holes are waiting near the radius of curvature should be up to the place of training. There are many times when we burn / punch hole forming plasma in the material before rolling or. But our tolerances are usually 1 / 8 "(3mm). However, where the tolerances are more stringent, we must await the completion of training, equipment and welding was done (with the possible withdrawal of the welds) that locating holes.
Good luck.
Post a Comment